Streamlight 61126 ClipMate USB Rechargeable Clip-On Light with 1
$25
Streamlight 61126 ClipMate USB Rechargeable Clip-On Light with 1
This fits your
From the manufacturer
Streamlight 61126 ClipMate USB Clip Light, Black
PRODUCT SPECIFICATIONS:
- Run Time on High: 3.50 hours
- Run Time on Low: 24.00 hours
- Beam Distance: 44 meters
- Powered by one (1) Lithium Polymer Cell
- Length: 3.20 inches (8.13 centimeters)
- Width: 1.39 in. (35 mm)
- Thickness: 65 in. (17 mm)
- Weight: 1.90 ounces (53.86 grams) with battery
With 120-Volt AC Adapter
A multi-function, USB rechargeable clip-on light that grabs onto pockets or hats for hands-free use. No need to worry about finding a cord to charge it, as it features a built-in USB charge tab.
The Clipmate USB is a sleek compact USB rechargeable, lithium polymer battery powered flashlight with a flexible neck designed to put light where you need it. It features a multi function switch, a pocket clip for convenience, and amazing brightness and run time for a light of its size. With its built in USB charge tab, there is no need for a cord to recharge the light. Extremely durable, abrasion resistant and light weight.
Rechargeable, Compact Clip-on Light
|
|
|
|
|---|---|---|
|
|
|
|
C4 LED technology for extreme brightness.
- White LED
- High: 500 candela peak beam intensity, 44 meter beam distance, 70 lumens, runs 3.5 hours
- Low: 50 candela peak beam intensity; 14 meter beam distance, 10 lumens, runs 24 hours
- 3mm 620-630 nm Red LED
- High: 9 candela peak beam intensity, 6 meter beam distance, 0.5 lumens, runs 16 hours
- Low: 3 candela peak beam intensity, 3 meter beam distance, 0.2 lumens, runs 65 hours
LITHIUM POLYMER FLASHLIGHT
Built Tough:
High-impact, engineered polymer construction for extreme durability, abrasion resistance; gasket-sealed polycarbonate lens. IPX4 water-resistant; 1 meter impact resistance tested.
Battery amp; Charging:
BATTERY: Streamlight Lithium Polymer cell with on board safety circuit. Rechargeable up to 300 times.
CHARGING: Digital control circuit prevents overcharge. Fully recharges battery in 2.5 hours and charges battery in product. Charges via USB port or AC wall adapter.
Push Button On/Off Switch:
Cycles through low, high and off; turn light on then press and hold the button to change from white LED to red LED.
- Light source remains on selected mode until the button is pressed and held to change modes
- Unbreakable pocket clip grabs onto pocket, belt, MOLLE, etc.
- USB cover tethered to prevent loss
- Fully regulated output for consistent lumen performance over the battery life
- Charge status indicator: steady red – charging; blinking red – charged
